[Back to Product Line][Home] Reno Sales Office (775) 677-5300

[Cold Formed Hanger][Forged Steel Hanger][Conveyor Hanger][Bleeding Rail Hanger]

Next Catalog Page

Previous Catalog Page

6005 Cold Formed Hanger

Structural shape provides maximum strength with least weight.  Formed from 3/16" x 4" cold rolled high strength steel.  Stronger than cast iron or #6002 steel hanger.  Sudden failure possible with cast iron hangers is eliminated.   Hangers have been tested with loads in excess of 3,500 lbs. without permanent deflection.  These hangers are especially economical on galvanized jobs.   Available in stainless steel, painted or Zinc plated.

top

6002 Forged Steel Hanger

Single heel type, made of 1/2" x 2-1/2" steel in any size desired.  9", 10", 10-1/2", 11", 12" and 13-1/2" carried in stock with slotted hole directly above track for lagging or bolting to timber or beam, and with 3/8" holes for mounting track, the center hole for use on a straight run, the two outside holes for track joint.  Also available with two top mounting holes for I-beam mounting

6503-5 Conveyor Hanger

No. 6503-5 series recommended for most installations--carefully constructed to rigid tolerances, complete with locating lugs for chain supports and guard rail.  Chain return hangers are similar except track support is eliminated.

top

6003-1 and 2 Forged Steel
Bleeding Rail Hanger

Made of 5/8" x 3" high tensile steel.  Normally supplied with single center hole for attachement to steel structural members.  Supplied with 3 holes for bleeding rail attachement.  Standard length is 14" but other lengths are available on special order.  Weight (14" hanger) 14-1/2 lbs.